Overloading subprograms v14

Generally, subprograms of the same type (subprocedure or subfunction) with the same name and same formal parameter specification can appear multiple times in the same standalone program as long as they aren't sibling blocks (that is, the subprograms aren't declared in the same local block).

You can invoke aach subprogram individually depending on the use of qualifiers and the location where the subprogram invocation is made.

However, it's possible to declare subprograms, even as siblings, that are of the same subprogram type and name as long as certain aspects of the formal parameters differ. These characteristics (subprogram type, name, and formal parameter specification) are generally known as a program’s signature.

The declaration of multiple subprograms where the signatures are identical except for certain aspects of the formal parameter specification is referred to as subprogram overloading.

Thus, the particular overloaded subprogram to invoke is determined by a match of the actual parameters specified by the subprogram invocation and the formal parameter lists of the overloaded subprograms.

Any of the following differences permit overloaded subprograms:

• The number of formal parameters are different.
• At least one pair of data types of the corresponding formal parameters (that is, compared according to the same order of appearance in the formal parameter list) are different but aren't aliases.

The following differences alone don't permit overloaded subprograms:

• Different formal parameter names
• Different parameter modes (IN, IN OUT, OUT) for the corresponding formal parameters
• For subfunctions, different data types in the RETURN clause

One of the differences allowing overloaded subprograms is different data types.

However, certain data types have alternative names referred to as aliases, which can be used for the table definition.

For example, you can specify fixed-length character data types as CHAR or CHARACTER. You can specify variable-length character data types as CHAR VARYING, CHARACTER VARYING, VARCHAR, or VARCHAR2. For integers, there are BINARY_INTEGER, PLS_INTEGER, and INTEGER data types. For numbers, there are NUMBER, NUMERIC, DEC, and DECIMAL data types.

For detailed information about the data types supported by EDB Postgres Advanced Server, see Data types.

Thus, when attempting to create overloaded subprograms, the formal parameter data types aren't considered different if the specified data types are aliases of each other.

You can determine if certain data types are aliases of other types by displaying the table definition containing the data types.

For example, the following table definition contains some data types and their aliases:

CREATE TABLE data_type_aliases (
    dt_BLOB             BLOB,
    dt_LONG_RAW         LONG RAW,
    dt_RAW              RAW(4),
    dt_BYTEA            BYTEA,
    dt_INTEGER          INTEGER,
    dt_BINARY_INTEGER   BINARY_INTEGER,
    dt_PLS_INTEGER      PLS_INTEGER,
    dt_REAL             REAL,
    dt_DOUBLE_PRECISION DOUBLE PRECISION,
    dt_FLOAT            FLOAT,
    dt_NUMBER           NUMBER,
    dt_DECIMAL          DECIMAL,
    dt_NUMERIC          NUMERIC,
    dt_CHAR             CHAR,
    dt_CHARACTER        CHARACTER,
    dt_VARCHAR2         VARCHAR2(4),
    dt_CHAR_VARYING     CHAR VARYING(4),
    dt_VARCHAR          VARCHAR(4)
);

Using the PSQL \d command to display the table definition, the Type column displays the data type internally assigned to each column based on its data type in the table definition.

\d data_type_aliases
       Column        |         Type         | Modifiers
---------------------+----------------------+-----------
 dt_blob             | bytea                |
 dt_long_raw         | bytea                |
 dt_raw              | bytea(4)             |
 dt_bytea            | bytea                |
 dt_integer          | integer              |
 dt_binary_integer   | integer              |
 dt_pls_integer      | integer              |
 dt_real             | real                 |
 dt_double_precision | double precision     |
 dt_float            | double precision     |
 dt_number           | numeric              |
 dt_decimal          | numeric              |
 dt_numeric          | numeric              |
 dt_char             | character(1)         |
 dt_character        | character(1)         |
 dt_varchar2         | character varying(4) |
 dt_char_varying     | character varying(4) |
 dt_varchar          | character varying(4) |

In the example, the base set of data types are bytea, integer, real, double precision, numeric, character, and character varying.

When attempting to declare overloaded subprograms, a pair of formal parameter data types that are aliases aren't enough to allow subprogram overloading. Thus, parameters with data types INTEGER and PLS_INTEGER can't overload a pair of subprograms. However, data types INTEGER and REAL, INTEGER and FLOAT, or INTEGER and NUMBER can overload the subprograms.

For certain pairs of data types used for overloading, you might need to cast the arguments specified by the subprogram invocation to avoid an error encountered during runtime of the subprogram. Invoking a subprogram must include the actual parameter list that can specifically identify the data types. Certain pairs of overloaded data types might require the CAST function to explicitly identify data types. For example, pairs of overloaded data types that might require casting during the invocation are CHAR and VARCHAR2, or NUMBER and REAL.

This example shows a group of overloaded subfunctions invoked from an anonymous block. The executable section of the anonymous block contains the use of the CAST function to invoke overloaded functions with certain data types.

DECLARE
    FUNCTION add_it (
        p_add_1     IN BINARY_INTEGER,
        p_add_2     IN BINARY_INTEGER
    ) RETURN VARCHAR2
    IS
    BEGIN
        RETURN 'add_it BINARY_INTEGER: ' || TO_CHAR(p_add_1 + p_add_2,9999.9999);
    END add_it;
    FUNCTION add_it (
        p_add_1     IN NUMBER,
        p_add_2     IN NUMBER
    ) RETURN VARCHAR2
    IS
    BEGIN
        RETURN 'add_it NUMBER: ' || TO_CHAR(p_add_1 + p_add_2,999.9999);
    END add_it;
    FUNCTION add_it (
        p_add_1     IN REAL,
        p_add_2     IN REAL
    ) RETURN VARCHAR2
    IS
    BEGIN
        RETURN 'add_it REAL: ' || TO_CHAR(p_add_1 + p_add_2,9999.9999);
    END add_it;
    FUNCTION add_it (
        p_add_1     IN DOUBLE PRECISION,
        p_add_2     IN DOUBLE PRECISION
    ) RETURN VARCHAR2
    IS
    BEGIN
        RETURN 'add_it DOUBLE PRECISION: ' || TO_CHAR(p_add_1 + p_add_2,9999.9999);
    END add_it;
BEGIN
    DBMS_OUTPUT.PUT_LINE(add_it (25, 50));
    DBMS_OUTPUT.PUT_LINE(add_it (25.3333, 50.3333));
    DBMS_OUTPUT.PUT_LINE(add_it (TO_NUMBER(25.3333), TO_NUMBER(50.3333)));
    DBMS_OUTPUT.PUT_LINE(add_it (CAST('25.3333' AS REAL), CAST('50.3333' AS REAL)));
    DBMS_OUTPUT.PUT_LINE(add_it (CAST('25.3333' AS DOUBLE PRECISION),
        CAST('50.3333' AS DOUBLE PRECISION)));
END;

The following is the output displayed from the anonymous block:

add_it BINARY_INTEGER:    75.0000
add_it NUMBER:   75.6666
add_it NUMBER:   75.6666
add_it REAL:    75.6666
add_it DOUBLE PRECISION:    75.6666