Table 9-28 shows the available functions for date/time value processing, with details appearing in the following subsections. Table 9-27 illustrates the behaviors of the basic arithmetic operators (+, *, etc.). For formatting functions, refer to Section 9.8. You should be familiar with the background information on date/time data types from Section 8.5.
All the functions and operators described below that take time or timestamp inputs actually come in two variants: one that takes time with time zone or timestamp with time zone, and one that takes time without time zone or timestamp without time zone. For brevity, these variants are not shown separately. Also, the + and * operators come in commutative pairs (for example both date + integer and integer + date); we show only one of each such pair.
Table 9-27. Date/Time Operators
|+||date '2001-09-28' + integer '7'||date '2001-10-05'|
|+||date '2001-09-28' + interval '1 hour'||timestamp '2001-09-28 01:00:00'|
|+||date '2001-09-28' + time '03:00'||timestamp '2001-09-28 03:00:00'|
|+||interval '1 day' + interval '1 hour'||interval '1 day 01:00:00'|
|+||timestamp '2001-09-28 01:00' + interval '23 hours'||timestamp '2001-09-29 00:00:00'|
|+||time '01:00' + interval '3 hours'||time '04:00:00'|
|-||- interval '23 hours'||interval '-23:00:00'|
|-||date '2001-10-01' - date '2001-09-28'||integer '3' (days)|
|-||date '2001-10-01' - integer '7'||date '2001-09-24'|
|-||date '2001-09-28' - interval '1 hour'||timestamp '2001-09-27 23:00:00'|
|-||time '05:00' - time '03:00'||interval '02:00:00'|
|-||time '05:00' - interval '2 hours'||time '03:00:00'|
|-||timestamp '2001-09-28 23:00' - interval '23 hours'||timestamp '2001-09-28 00:00:00'|
|-||interval '1 day' - interval '1 hour'||interval '1 day -01:00:00'|
|-||timestamp '2001-09-29 03:00' - timestamp '2001-09-27 12:00'||interval '1 day 15:00:00'|
|*||900 * interval '1 second'||interval '00:15:00'|
|*||21 * interval '1 day'||interval '21 days'|
|*||double precision '3.5' * interval '1 hour'||interval '03:30:00'|
|/||interval '1 hour' / double precision '1.5'||interval '00:40:00'|
Table 9-28. Date/Time Functions
||interval||Subtract arguments, producing a "symbolic" result that uses years and months, rather than just days||age(timestamp '2001-04-10', timestamp '1957-06-13')||43 years 9 mons 27 days|
|interval||Subtract from ||age(timestamp '1957-06-13')||43 years 8 mons 3 days|
||timestamp with time zone||Current date and time (changes during statement execution); see Section 9.9.4|
||date||Current date; see Section 9.9.4|
||time with time zone||Current time of day; see Section 9.9.4|
||timestamp with time zone||Current date and time (start of current transaction); see Section 9.9.4|
||double precision||Get subfield (equivalent to ||date_part('hour', timestamp '2001-02-16 20:38:40')||20|
|double precision||Get subfield (equivalent to
||date_part('month', interval '2 years 3 months')||3|
||timestamp||Truncate to specified precision; see also Section 9.9.2||date_trunc('hour', timestamp '2001-02-16 20:38:40')||2001-02-16 20:00:00|
|interval||Truncate to specified precision; see also Section 9.9.2||date_trunc('hour', interval '2 days 3 hours 40 minutes')||2 days 03:00:00|
||double precision||Get subfield; see Section 9.9.1||extract(hour from timestamp '2001-02-16 20:38:40')||20|
|double precision||Get subfield; see Section 9.9.1||extract(month from interval '2 years 3 months')||3|
||boolean||Test for finite date (not +/-infinity)||isfinite(date '2001-02-16')||true|
|boolean||Test for finite time stamp (not +/-infinity)||isfinite(timestamp '2001-02-16 21:28:30')||true|
|boolean||Test for finite interval||isfinite(interval '4 hours')||true|
||interval||Adjust interval so 30-day time periods are represented as months||justify_days(interval '35 days')||1 mon 5 days|
||interval||Adjust interval so 24-hour time periods are represented as days||justify_hours(interval '27 hours')||1 day 03:00:00|
||interval||Adjust interval using ||justify_interval(interval '1 mon -1 hour')||29 days 23:00:00|
||time||Current time of day; see Section 9.9.4|
||timestamp||Current date and time (start of current transaction); see Section 9.9.4|
||date||Create date from year, month and day fields||make_date(2013, 7, 15)||2013-07-15|
||interval||Create interval from years, months, weeks, days, hours, minutes and seconds fields||make_interval(days => 10)||10 days|
||time||Create time from hour, minute and seconds fields||make_time(8, 15, 23.5)||08:15:23.5|
||timestamp||Create timestamp from year, month, day, hour, minute and seconds fields||make_timestamp(2013, 7, 15, 8, 15, 23.5)||2013-07-15 08:15:23.5|
||timestamp with time zone||Create timestamp with time zone from year, month, day, hour, minute and seconds fields. When timezone is not specified, then current time zone is used.||make_timestamptz(2013, 7, 15, 8, 15, 23.5)||2013-07-15 08:15:23.5+01|
||timestamp with time zone||Current date and time (start of current transaction); see Section 9.9.4|
||timestamp with time zone||Current date and time (start of current statement); see Section 9.9.4|
||text||Current date and time
||timestamp with time zone||Current date and time (start of current transaction); see Section 9.9.4|
In addition to these functions, the SQL OVERLAPS operator is supported:
(start1, end1) OVERLAPS (start2, end2) (start1, length1) OVERLAPS (start2, length2)
This expression yields true when two time periods (defined by their endpoints) overlap, false when they do not overlap. The endpoints can be specified as pairs of dates, times, or time stamps; or as a date, time, or time stamp followed by an interval. When a pair of values is provided, either the start or the end can be written first; OVERLAPS automatically takes the earlier value of the pair as the start. Each time period is considered to represent the half-open interval start <= time < end, unless start and end are equal in which case it represents that single time instant. This means for instance that two time periods with only an endpoint in common do not overlap.
SELECT (DATE '2001-02-16', DATE '2001-12-21') OVERLAPS (DATE '2001-10-30', DATE '2002-10-30'); Result: true SELECT (DATE '2001-02-16', INTERVAL '100 days') OVERLAPS (DATE '2001-10-30', DATE '2002-10-30'); Result: false SELECT (DATE '2001-10-29', DATE '2001-10-30') OVERLAPS (DATE '2001-10-30', DATE '2001-10-31'); Result: false SELECT (DATE '2001-10-30', DATE '2001-10-30') OVERLAPS (DATE '2001-10-30', DATE '2001-10-31'); Result: true
When adding an interval value to (or subtracting an interval value from) a timestamp with time zone value, the days component advances or decrements the date of the timestamp with time zone by the indicated number of days. Across daylight saving time changes (when the session time zone is set to a time zone that recognizes DST), this means interval '1 day' does not necessarily equal interval '24 hours'. For example, with the session time zone set to CST7CDT, timestamp with time zone '2005-04-02 12:00-07' + interval '1 day' will produce timestamp with time zone '2005-04-03 12:00-06', while adding interval '24 hours' to the same initial timestamp with time zone produces timestamp with time zone '2005-04-03 13:00-06', as there is a change in daylight saving time at 2005-04-03 02:00 in time zone CST7CDT.
Note there can be ambiguity in the months field returned by
age because different months have different numbers of
days. PostgreSQL's approach uses the month from the
earlier of the two dates when calculating partial months. For example,
age('2004-06-01', '2004-04-30') uses April to yield
1 mon 1 day, while using May would yield 1 mon 2
days because May has 31 days, while April has only 30.
Subtraction of dates and timestamps can also be complex. One conceptually
simple way to perform subtraction is to convert each value to a number
of seconds using EXTRACT(EPOCH FROM ...), then subtract the
results; this produces the
number of seconds between the two values. This will adjust
for the number of days in each month, timezone changes, and daylight
saving time adjustments. Subtraction of date or timestamp
values with the "-" operator
returns the number of days (24-hours) and hours/minutes/seconds
between the values, making the same adjustments. The
function returns years, months, days, and hours/minutes/seconds,
performing field-by-field subtraction and then adjusting for negative
field values. The following queries illustrate the differences in these
approaches. The sample results were produced with timezone
= 'US/Eastern'; there is a daylight saving time change between the
two dates used:
SELECT EXTRACT(EPOCH FROM timestamptz '2013-07-01 12:00:00') - EXTRACT(EPOCH FROM timestamptz '2013-03-01 12:00:00'); Result: 10537200 SELECT (EXTRACT(EPOCH FROM timestamptz '2013-07-01 12:00:00') - EXTRACT(EPOCH FROM timestamptz '2013-03-01 12:00:00')) / 60 / 60 / 24; Result: 121.958333333333 SELECT timestamptz '2013-07-01 12:00:00' - timestamptz '2013-03-01 12:00:00'; Result: 121 days 23:00:00 SELECT age(timestamptz '2013-07-01 12:00:00', timestamptz '2013-03-01 12:00:00'); Result: 4 mons
EXTRACT(field FROM source)
extract function retrieves subfields
such as year or hour from date/time values.
source must be a value expression of
type timestamp, time, or interval.
(Expressions of type date are
cast to timestamp and can therefore be used as
well.) field is an identifier or
string that selects what field to extract from the source value.
extract function returns values of type
The following are valid field names:
SELECT EXTRACT(CENTURY FROM TIMESTAMP '2000-12-16 12:21:13'); Result: 20 SELECT EXTRACT(CENTURY FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 21
The first century starts at 0001-01-01 00:00:00 AD, although they did not know it at the time. This definition applies to all Gregorian calendar countries. There is no century number 0, you go from -1 century to 1 century. If you disagree with this, please write your complaint to: Pope, Cathedral Saint-Peter of Roma, Vatican.
For timestamp values, the day (of the month) field (1 - 31) ; for interval values, the number of days
SELECT EXTRACT(DAY FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 16 SELECT EXTRACT(DAY FROM INTERVAL '40 days 1 minute'); Result: 40
The year field divided by 10
SELECT EXTRACT(DECADE FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 200
The day of the week as Sunday (0) to Saturday (6)
SELECT EXTRACT(DOW FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 5
extract's day of the week numbering differs from that of the
The day of the year (1 - 365/366)
SELECT EXTRACT(DOY FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 47
For timestamp with time zone values, the number of seconds since 1970-01-01 00:00:00 UTC (can be negative); for date and timestamp values, the number of seconds since 1970-01-01 00:00:00 local time; for interval values, the total number of seconds in the interval
SELECT EXTRACT(EPOCH FROM TIMESTAMP WITH TIME ZONE '2001-02-16 20:38:40.12-08'); Result: 982384720.12 SELECT EXTRACT(EPOCH FROM INTERVAL '5 days 3 hours'); Result: 442800
Here is how you can convert an epoch value back to a time stamp:
SELECT TIMESTAMP WITH TIME ZONE 'epoch' + 982384720.12 * INTERVAL '1 second';
to_timestampfunction encapsulates the above conversion.)
The hour field (0 - 23)
SELECT EXTRACT(HOUR FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 20
The day of the week as Monday (1) to Sunday (7)
SELECT EXTRACT(ISODOW FROM TIMESTAMP '2001-02-18 20:38:40'); Result: 7
This is identical to dow except for Sunday. This matches the ISO 8601 day of the week numbering.
The ISO 8601 week-numbering year that the date falls in (not applicable to intervals)
SELECT EXTRACT(ISOYEAR FROM DATE '2006-01-01'); Result: 2005 SELECT EXTRACT(ISOYEAR FROM DATE '2006-01-02'); Result: 2006
Each ISO 8601 week-numbering year begins with the Monday of the week containing the 4th of January, so in early January or late December the ISO year may be different from the Gregorian year. See the week field for more information.
This field is not available in PostgreSQL releases prior to 8.3.
The seconds field, including fractional parts, multiplied by 1 000 000; note that this includes full seconds
SELECT EXTRACT(MICROSECONDS FROM TIME '17:12:28.5'); Result: 28500000
SELECT EXTRACT(MILLENNIUM FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 3
Years in the 1900s are in the second millennium. The third millennium started January 1, 2001.
The seconds field, including fractional parts, multiplied by 1000. Note that this includes full seconds.
SELECT EXTRACT(MILLISECONDS FROM TIME '17:12:28.5'); Result: 28500
The minutes field (0 - 59)
SELECT EXTRACT(MINUTE FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 38
For timestamp values, the number of the month within the year (1 - 12) ; for interval values, the number of months, modulo 12 (0 - 11)
SELECT EXTRACT(MONTH FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 2 SELECT EXTRACT(MONTH FROM INTERVAL '2 years 3 months'); Result: 3 SELECT EXTRACT(MONTH FROM INTERVAL '2 years 13 months'); Result: 1
The quarter of the year (1 - 4) that the date is in
SELECT EXTRACT(QUARTER FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 1
The seconds field, including fractional parts (0 - 59)
SELECT EXTRACT(SECOND FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 40 SELECT EXTRACT(SECOND FROM TIME '17:12:28.5'); Result: 28.5
The time zone offset from UTC, measured in seconds. Positive values correspond to time zones east of UTC, negative values to zones west of UTC. (Technically, PostgreSQL uses UT1 because leap seconds are not handled.)
The hour component of the time zone offset
The minute component of the time zone offset
The number of the ISO 8601 week-numbering week of the year. By definition, ISO weeks start on Mondays and the first week of a year contains January 4 of that year. In other words, the first Thursday of a year is in week 1 of that year.
In the ISO week-numbering system, it is possible for early-January dates to be part of the 52nd or 53rd week of the previous year, and for late-December dates to be part of the first week of the next year. For example, 2005-01-01 is part of the 53rd week of year 2004, and 2006-01-01 is part of the 52nd week of year 2005, while 2012-12-31 is part of the first week of 2013. It's recommended to use the isoyear field together with week to get consistent results.
SELECT EXTRACT(WEEK FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 7
The year field. Keep in mind there is no 0 AD, so subtracting BC years from AD years should be done with care.
SELECT EXTRACT(YEAR FROM TIMESTAMP '2001-02-16 20:38:40'); Result: 2001
extract function is primarily intended
for computational processing. For formatting date/time values for
display, see Section 9.8.
date_part function is modeled on the traditional
Ingres equivalent to the
Note that here the field parameter needs to
be a string value, not a name. The valid field names for
date_part are the same as for
SELECT date_part('day', TIMESTAMP '2001-02-16 20:38:40'); Result: 16 SELECT date_part('hour', INTERVAL '4 hours 3 minutes'); Result: 4
date_trunc is conceptually
similar to the
trunc function for numbers.
source is a value expression of type timestamp or interval. (Values of type date and time are cast automatically to timestamp or interval, respectively.) field selects to which precision to truncate the input value. The return value is of type timestamp or interval with all fields that are less significant than the selected one set to zero (or one, for day and month).
Valid values for field are:
SELECT date_trunc('hour', TIMESTAMP '2001-02-16 20:38:40'); Result: 2001-02-16 20:00:00 SELECT date_trunc('year', TIMESTAMP '2001-02-16 20:38:40'); Result: 2001-01-01 00:00:00
The AT TIME ZONE converts time stamp without time zone to/from time stamp with time zone, and time values to different time zones. Table 9-29 shows its variants.
Table 9-29. AT TIME ZONE Variants
|timestamp without time zone AT TIME ZONE zone||timestamp with time zone||Treat given time stamp without time zone as located in the specified time zone|
|timestamp with time zone AT TIME ZONE zone||timestamp without time zone||Convert given time stamp with time zone to the new time zone, with no time zone designation|
|time with time zone AT TIME ZONE zone||time with time zone||Convert given time with time zone to the new time zone|
In these expressions, the desired time zone zone can be specified either as a text string (e.g., 'America/Los_Angeles') or as an interval (e.g., INTERVAL '-08:00'). In the text case, a time zone name can be specified in any of the ways described in Section 8.5.3.
Examples (assuming the local time zone is America/Los_Angeles):
SELECT TIMESTAMP '2001-02-16 20:38:40' AT TIME ZONE 'America/Denver'; Result: 2001-02-16 19:38:40-08 SELECT TIMESTAMP WITH TIME ZONE '2001-02-16 20:38:40-05' AT TIME ZONE 'America/Denver'; Result: 2001-02-16 18:38:40 SELECT TIMESTAMP '2001-02-16 20:38:40-05' AT TIME ZONE 'Asia/Tokyo' AT TIME ZONE 'America/Chicago'; Result: 2001-02-16 05:38:40
The first example adds a time zone to a value that lacks it, and displays the value using the current TimeZone setting. The second example shifts the time stamp with time zone value to the specified time zone, and returns the value without a time zone. This allows storage and display of values different from the current TimeZone setting. The third example converts Tokyo time to Chicago time. Converting time values to other time zones uses the currently active time zone rules since no date is supplied.
timestamp) is equivalent to the SQL-conforming construct
timestamp AT TIME ZONE
PostgreSQL provides a number of functions that return values related to the current date and time. These SQL-standard functions all return values based on the start time of the current transaction:
CURRENT_DATE CURRENT_TIME CURRENT_TIMESTAMP CURRENT_TIME(precision) CURRENT_TIMESTAMP(precision) LOCALTIME LOCALTIMESTAMP LOCALTIME(precision) LOCALTIMESTAMP(precision)
CURRENT_TIMESTAMP deliver values with time zone;
LOCALTIMESTAMP deliver values without time zone.
can optionally take
a precision parameter, which causes the result to be rounded
to that many fractional digits in the seconds field. Without a precision parameter,
the result is given to the full available precision.
SELECT CURRENT_TIME; Result: 14:39:53.662522-05 SELECT CURRENT_DATE; Result: 2001-12-23 SELECT CURRENT_TIMESTAMP; Result: 2001-12-23 14:39:53.662522-05 SELECT CURRENT_TIMESTAMP(2); Result: 2001-12-23 14:39:53.66-05 SELECT LOCALTIMESTAMP; Result: 2001-12-23 14:39:53.662522
Since these functions return the start time of the current transaction, their values do not change during the transaction. This is considered a feature: the intent is to allow a single transaction to have a consistent notion of the "current" time, so that multiple modifications within the same transaction bear the same time stamp.
Note: Other database systems might advance these values more frequently.
PostgreSQL also provides functions that return the start time of the current statement, as well as the actual current time at the instant the function is called. The complete list of non-SQL-standard time functions is:
transaction_timestamp() statement_timestamp() clock_timestamp() timeofday() now()
transaction_timestamp() is equivalent to
CURRENT_TIMESTAMP, but is named to clearly reflect
what it returns.
statement_timestamp() returns the start time of the current
statement (more specifically, the time of receipt of the latest command
message from the client).
return the same value during the first command of a transaction, but might
differ during subsequent commands.
clock_timestamp() returns the actual current time, and
therefore its value changes even within a single SQL command.
timeofday() is a historical
PostgreSQL function. Like
clock_timestamp(), it returns the actual current time,
but as a formatted text string rather than a timestamp
with time zone value.
now() is a traditional PostgreSQL
All the date/time data types also accept the special literal value now to specify the current date and time (again, interpreted as the transaction start time). Thus, the following three all return the same result:
SELECT CURRENT_TIMESTAMP; SELECT now(); SELECT TIMESTAMP 'now'; -- incorrect for use with DEFAULT
Tip: You do not want to use the third form when specifying a DEFAULT clause while creating a table. The system will convert now to a timestamp as soon as the constant is parsed, so that when the default value is needed, the time of the table creation would be used! The first two forms will not be evaluated until the default value is used, because they are function calls. Thus they will give the desired behavior of defaulting to the time of row insertion.
The following functions are available to delay execution of the server process:
pg_sleep(seconds) pg_sleep_for(interval) pg_sleep_until(timestamp with time zone)
pg_sleep makes the current session's process
sleep until seconds seconds have
elapsed. seconds is a value of type
double precision, so fractional-second delays can be specified.
pg_sleep_for is a convenience function for larger
sleep times specified as an interval.
pg_sleep_until is a convenience function for when
a specific wake-up time is desired.
SELECT pg_sleep(1.5); SELECT pg_sleep_for('5 minutes'); SELECT pg_sleep_until('tomorrow 03:00');
Note: The effective resolution of the sleep interval is platform-specific; 0.01 seconds is a common value. The sleep delay will be at least as long as specified. It might be longer depending on factors such as server load. In particular,
pg_sleep_untilis not guaranteed to wake up exactly at the specified time, but it will not wake up any earlier.
Make sure that your session does not hold more locks than necessary
60 if leap seconds are implemented by the operating system